QT-XPJ-01 Silicone defoamer is a kind of concentrated solution
which reaches nearly 100% activity and can be diluted. It can reach
the persistence of traditional defoamer in a small amount. Normally
it is used for conventional surfactant, polymer foaming system.
Recommended industries: sewage treatment, industrial cleaning,
● NO NP,APEO
● NO mentioned material on SVHC list under REACH law.
● NO materials in ROSH order(Instructions for limiting the use of
certain hazardous substances in electrical and electronic
● It can be used after high dilution or in combination with other
● It is composed of polysiloxane modified by polyether, polyether
polyol and organosilicon active material.
|physical property||physicochemical property|
|Appearance||milky viscous liquid at room temperature, no sediment, no visible
|Bubble suppression rate(ml/s)||>2|
|Note: The above data are for reference only and not as technical
(1)Defoamer is a mixture. During storage period, it may appear
delamination or a little precipitation. This is a normal
phenomenon. A little stirring before use is recommended (stirring
speed is 30 rpm-60rpm), which does not affect the use effect.
(2)This product can be diluted with thickening water, during the
dilution process, the stirring speed is 30 rpm-60rpm, and
recommended stirring time is not more than 10 min. Please request
the specific dilution method to our customer service department.
Our company is not responsible for negative results from incorrect
(3) When this product is used on site, it is recommended to choose
the place where the defoamer is easy to disperse
The best dosing point, dosage, dosing method, diluting ratio need
to be determined by the customer according to the actual situation
of the field test.
Package and storage:
This product is packed in 25 KG,200 KG plastic drum or 1000 tons
IBC tank. This product is suitable for indoor storage under 5℃~40℃.
The products are not allowed to be placed near the heat source and
should be stored avoid exposure and rain as well as being mixed
storage with corrosive substances.
Do not add acid, alkali, salt and other material to this product.
Store the product as general chemical method. After using, ensure
sealing and avoid deterioration.
If burned, it should be dealt with fire extinguishing method as
Under the recommended storage conditions, shelf life is 12 months
executive standard:Q320106 SXKJ 011-2019